Home / Application Window / Marker

• Home
• Introduction
• Setup
• Application Window
  • Main Window
  • Menus
  • Toolbar
  • Clock Textbox
  • Marker
  • Linear Chirp Groupbox
• Using the GUI
• Contact Us
• Euvis Inc.

Marker -

You can program the DSM202 marker to suit your application. The marker consists of two parameters: the Start and the Width. Please note that both parameters are specified in hexadecimal.

Start

Specifies the starting position of the marker. Each position is one frequency update long. For example if Start was set to "2" then after the second frequency update or at the start of the third frequency update, the marker will be active and go high assuming the Width parameter is greater than zero. Recall that the frequency update time is equal to 32 times the input clock period.

Width

Specifies the length of the marker. One marker width is equal to one frequency update time. For example if Width was set to "4" then the marker will be active or high for 4 frequency updates.