Home / Using the GUI / Operating Conditions

• Home
• Introduction
• Setup
• Application Window
• Using the GUI
  • Operating Conditions
  • Waveform Generation Modes
  • Waveform Parameters
• Contact Us
• Euvis Inc.

Operating Conditions -

Before powering the DSM202 module, make sure proper operating conditions are met:

1. Make sure the software is set up properly.

2. Make sure the DDS has proper airflow and is fanned properly.
  *The DDS gets hot when running. For DDS location see Board Layout.

3. Make sure the hardware is set up properly.

With these 3 conditions met, the DSM202 is ready to be operated. Plug in the power and run the DSM202 GUI.